Tubing Connectors and Fittings
Chemglass Life Sciences Flange, Compatible with Buchi Rotary Evaporators, Flange OD: 210mm, Flange ID: 176mm, Shank OD: 190mm
Replacement flange compatible with Buchi condensers and rotary evaporator flasks. Flange OD: 210mm, Flange ID: 176mm, Shank OD: 190mm.
AVANTOR MASTERFLEX (VWR LLC) All-Plastic Quick Disconnect Sealing Cap, PS, 5/pack
CPC (Colder) MPC32039 All-Plastic Quick Disconnect Sealing Cap, Polysulfone (PS), 5/pack
Chemglass Life Sciences Adapter, Distillation, 105°, 24/40 Joint Size
Adapter, Distillation, 105¿, 24/40 Joint Size. Distillation adapter with top outer and lower inner joints both being the same size.
Chemglass Life Sciences Adapter, Vacuum Filtration, #1 Top Pluro Stopper, 14/20 Lower Inner, Fits Funnel Capacity 2 to 30mL
Adapter, Vacuum Filtration, #1 Top Pluro Stopper, 14/20 Lower Inner, Fits Funnel Capacity 2 to 30mL. Adapters are used for reduced pressure filtration with plain stem Buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D. of 10mm at the largest serration. FOR PLURO STOPPERS SEE CG-1401.
Chemglass Life Sciences 24/40 Inner Joint, 16in OAL, on 22mm OD x 1.8mm W tubing
24/40 Inner Joint, 16in OAL, on 22mm OD x 1.8mm W tubing. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.
New Jersey Fluid Systems LLC PORT CONNECTOR
316 Stainless Steel Swagelok Tube Fitting Port Connector. 1/8 in. OD
Chemglass Life Sciences Internal Bushing, #11, PTFE, 1/8" NPT, #012 Viton O-Ring
Internal Bushing, #11, PTFE, 1/8" NPT, #012 Viton O-Ring.
Chemglass Life Sciences Adapter, Vacuum, 24/25 Outer to 24/25 Inner
Adapter has a ground glass standard taper outer joint on top and bottom that provides a convenient leak free way to connect to the OP-6602-J 2L disposable long stem filter funnels and a standard taper flask. The unique design of the long stem filter funnel and vacuum adapter makes it unnecessary to clean after each use. Hose connection is 10mm OD at the largest serration.
Chemglass Life Sciences Sleeve, PTFE, Full Length, 10/30 Joint Size
Sleeve, PTFE, Medium Length, 10/30 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Sleeve, PTFE, Full Length, 45/50 Joint Size
Sleeve, PTFE, Medium Length, 45/50 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Adapter fits bushing size 15
Adapter fits bushing size 15. Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples into a conventional round bottom flask. Joint sizes other than 24/40 are available upon request. Adapter is supplied complete with one CG-362 open top bushing of the listed size and Viton o-ring.
Chemglass Life Sciences Glass Adapter ONLY, 24/40
Glass Adapter ONLY, 24/40. Replacement part for CG2077A series of stirrer bearings.
Chemglass Life Sciences Glassblowers Hose Connection, Direct Sealing, 4 Rings, Dimensions (mm): "A" - 8.0, "B" - 13.5, "C" - 16, "D" - 30, "E" Tubing O.D. 16mm
Glassblowers Hose Connection, Direct Sealing, 4 Rings, Dimensions (mm): "A" - 8.0, "B" - 13.5, "C" - 16, "D" - 30, "E" Tubing O.D. 16mm. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).
Chemglass Life Sciences Distilling adapter, Single, 45/50 Joint, 10mm PTFE Stopcock, 3/4" Swagelock
Distilling adapter, Single, 45/50 Joint, 10mm PTFE Stopcock, 3/4" Swagelock. Compact and simple distilling adapter for use with Chemglass process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver. Adapter has a lower inner joint and is available with one or two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE with a 1/2¿ or 3/4¿ OD distillate takeoff for use with a compression fitting and TFE tubing. Adapter is 6¿ overall wide with joints offset 95mm center to center.